# $XConsortium: terminfo,v 1.11 94/10/13 21:24:31 gildea Exp $ # $XFree86: xc/programs/xterm/terminfo,v 3.13.2.6 1998/10/20 20:51:54 hohndel Exp $ # # XFree86 updates/notes/new entries (including xterm-8bit, xterm-16color) # - Thomas E. Dickey # # Special Capabilities: # -------------------- # which has a corresponding capability that inserts a single blank. We could # have used ich1=\E[@, which works with ncurses, but that is not standard # behavior. If it is set, then SVr4 vi (e.g., Solaris 2.6) emits both # smir/rmir and ich1. # meml locks memory above the cursor; memu unlocks (ala HP terminals). This # is not recognized by some older (e.g., SVr3) tic programs, but none # do more than warn about it. Ignore the warning. # rmcup clears memory before switching to the alternate screen. The older # (deprecated) \E[?47h did not do this, requiring applications to # embed a \E[2J in the rmcup string. However, that behavior cannot # be disabled via titeInhibit, making that resource not function as # intended on systems with terminfo. # rs2/is2 are shorter with XFree86 xterm because it supports DECSTR. We # use the shorter sequence for compatibility with the termcap, which # is trimmed to keep it shorter than 1023 characters. It (escape \E[!p) # replaces these in the conventional vt100 reset-string: # \E7 - save cursor (fixes origin-mode side-effect) # \E[r - reset scrolling margins # \E[m - reset SGR (including color) # \E[?7h - reset wraparound mode (DECAWM) # \E[?1l - reset application cursor keys (DECCKM) # \E[?6l - reset origin mode (DECOM) # \E8 - restore cursor # DECSTR is recognized by XFree86 xterm even in vt52 mode. # # Editing Keypad: # -------------- # XFree86 xterm emulates vt220 if the decTerminalID resource is set to 200 or # higher. Otherwise it emulates a vt100 or vt52 depending on the value of the # resource. When emulating a vt220, we support the editing keypad. Sun and PC # keyboards have an editing keypad which is similar to the vt220: # # VT220 editing keypad # ---------------------------- # Find Insert Remove # Select Prev Next # ---------------------------- # # Sun/PC editing keypad # ---------------------------- # Insert Home PageUp # Delete End PageDn # ---------------------------- # # If the sunKeyboard resource is true, we map it this way (adjusting the values # of Home, End and Delete): # VT220 Sun/PC # ---------------------------- # Find Home # Select End # Insert Insert # Remove Delete # Prev PageUp # Next PageDn # ---------------------------- # # Note that all of the keys on the editing keypad transmit escape sequences. A # vt220 does this only when in vt220 mode; when emulating a vt100 the editing # keypad is inactive. # xterm-xfree86|xterm-new|xterm terminal emulator (XFree86), am, bce, km, mc5i, mir, msgr, xenl, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[?1047l\E[?1048l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?1048h\E[?1047h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, # # The xterm-xfree86 description has all of the features, but is not completely # compatible with vt220. If you are using a Sun or PC keyboard, set the # sunKeyboard resource to true: # + maps the editing keypad # + interprets control-function-key as a second array of keys, so a # 12-fkey keyboard can support vt220's 20-fkeys. # + maps numeric keypad "+" to ",". # xterm-vt220|XFree86 xterm emulating vt220, kdch1=\E[3~, kend=\E[4~, kfnd=\E[1~, khome=\E[1~, kslt=\E[4~, use=xterm-xfree86, # Other variants: xterm-24|xterms|vs100|xterm terminal emulator (X Window System), lines#24, use=xterm, xterm-65|xterm with tall window 65x80 (X Window System), lines#65, use=xterm, xterm-bold|xterm with bold instead of underline (X Window System), smso=\E[7m, smul=\E[1m, use=xterm, xterm-mono|monochrome xterm (X Window System), colors@, ncv@, pairs@, op@, setab@, setaf@, setb@, setf@, sgr@, use=xterm, # # This should work for the commonly used "color xterm" variations (XFree86 # xterm, color_xterm, nxterm, rxvt): xterm-color|generic "ANSI" color xterm (X Window System), colors#8, ncv@, pairs#64, op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=xterm-r6, # xterm-boldso|xterm with bold for standout (X Window System), rmso=\E[m, smso=\E[1m, use=xterm, # # vi may work better with this entry, because vi # doesn't use insert mode much xterm-ic|xterm-vi|xterm with insert character instead of insert mode, mir@, ich=\E[%p1%d@, ich1=\E[@, rmir@, smir@, use=xterm, # # This is used only for testing (it's not relevant to DEC VTxxx terminals, but # to ncurses). xterm-xmc|xterm with magic-cookie glitch, xmc#1, use=xterm, # # This one also is primarily for testing ncurses; while the ISO 6429 defines # the REP control, none of the DEC VTxxx terminals (VT52 through VT420) support # it. xterm-rep|xterm with repeat-character control, rep=%p1%c\E[%p2%{1}%-%db, use=xterm, # # This is mainly for testing xterm; the real VT220 will not let you switch # character sets without first altering the keyboard language in the setup # screen. Some emulators allow this anyway. (Note that these strings are # normally used only for printers). The parameter to csnm and scs is the same # in both cases: the keyboard language parameter returned by CSI ? 2 6 n. xterm-nrc|xterm with VT220 national replacement character sets, csnm=%?%p1%{1}%=%tNorth American%e%p1%{2}%=%tBritish%e%p1%{3}%=%tFlemish%e%p1%{4}%=%tFrench Canadian%e%p1%{5}%=%tDanish%e%p1%{6}%=%tFinnish%e%p1%{7}%=%tGerman%e%p1%{8}%=%tDutch%e%p1%{9}%=%tItalian%e%p1%{10}%=%tSwiss (French)%e%p1%{11}%=%tSwiss (German)%e%p1%{12}%=%tSwedish%e%p1%{13}%=%tNorwegian%e%p1%{14}%=%tFrench/Belgian%e%p1%{15}%=%tSpanish%;, scs=%?%p1%{1}%=%t\E(B%e%p1%{2}%=%t\E(A%e%p1%{3}%=%t\E(R%e%p1%{4}%=%t\E(9%e%p1%{5}%=%t\E(E%e%p1%{6}%=%t\E(5%e%p1%{7}%=%t\E(K%e%p1%{8}%=%t\E(4%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(=%e%p1%{11}%=%t\E(=%e%p1%{12}%=%t\E(7%e%p1%{13}%=%t\E(E%e%p1%{14}%=%t\E(R%e%p1%{15}%=%t\E(Z%;, use=xterm, # # Foreground 0-15 maps (with toggles) into 30-37 & 90-97 # Background 0-15 maps (with toggles) into 40-47 & 100-107 # # Originally I suppressed setaf/setab, since ANSI specifies only 8 colors, but # Stephen Marley persuaded me to allow the "ANSI" color controls to extend to # 16 colors. (Note that ncurses 4.2 uses setf/setb from this description; # however 4.3 will select either according to their availability). - T.Dickey # # SVr4 curses does not use more than 8 colors anyway, so using 16 colors is # either for terminfo-level applications or via ncurses. xterm-16color|xterm with 16 colors, colors#16, ncv#32, pairs#256, setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, use=xterm-xfree86, # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. # To use it, your decTerminalID resource must be set to 200 or above. # # HTS \E H \210 # RI \E M \215 # SS3 \E O \217 # CSI \E [ \233 # xterm-8bit|xterm terminal emulator with 8-bit controls (X Window System), am, bce, km, mc5i, mir, msgr, xenl, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, civis=\233?25l, clear=\233H\2332J, cnorm=\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E(B\E)0, flash=\233?5h\233?5l, home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B, kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, khome=\2331~, kich1=\2332~, kmous=\233M, knp=\2336~, kpp=\2335~, kslt=\2334~, mc0=\233i, mc4=\2334i, mc5=\2335i, meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1047l\233?1048l, rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, rs1=\Ec, rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1048h\233?1047h, smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, # # Compatible with the R6 xterm, with the following changes: # + added acsc (perhaps some versions of tic assume the standard vt100 # alternate character set) # + added u6, u7, u8, u9 strings for Daniel Weaver's tack program. # + added kmous string for ncurses. # + added khome/kend strings. xterm-r6|xterm-old|xterm X11R6 version, am, km, mir, msgr, xenl, cols#80, it#8, lines#24, acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, enacs=\E)0, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, # # Compatible with the R5 xterm, with the following changes: # + changed 'blink=@', to 'blink@' (the former meant that "@" would start # a blink, the latter that it is not supported). # + changed kf1 through kf4 to correspond with actual usage. Though X # supports keypad symbols for PF1 to PF4, and xterm interprets these # correctly, the F1 to F4 codes are commonly (but incorrectly) used. # + moved reset string from rs1 to rs2, to correlate better with termcap. # + make khome consistent with other entries. # + use rmul/smul, rmir/smir from termcap, but not rmcup/smcup because # not everyone wants the alternate screen. xterm-r5|xterm R5 version, am, km, msgr, xenl, cols#80, it#8, lines#24, bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, sc=\E7, sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, # # This is the only entry which you should have to customize, since "xterm" # is widely used for a variety of incompatible terminal emulations including # color_xterm and rxvt. xterm|X Windows terminal emulator, use=xterm-xfree86, # use=xterm-r6,